OMNI Tx-3.1

OMNI Tx-3.1. The Tx-3.1 hand-size 2.4GHz transmitter, held in a hand for scale.

OMNI Tx-3.1

The OMNI Tx-3.1 transmitter is designed for operation of electrically powered locos with some servo functionality, e.g. with a Brian Jones sound card. It features four channels, two of which are fully proportional and operated by control knobs. The smaller, left-hand knob is zero-to-full and can be used for a servo function if required, and the larger, right-hand knob has a centre-off position and can be used for the ESC (electronic speed controller). The other two channels are controlled by the three buttons at the top of the transmitter. One is a full throw two-way function with a midpoint, ideal for operating two-way switcher units, and the other is a full travel actuator, which could be used for a coupling or any similar full travel on/off function. The transmitter also features cruise control, and has LED indication of radio status, battery status and telemetry feedback from the receiver.

The OMNI Tx-3.1 features quick and easy binding. No bind plug is required! You can bind in 3 seconds to any OMNI receiver. Every transmitter has a unique ID code. Model data is stored in the receiver, so a model can be bound to any OMNI transmitter and still function correctly.

The transmitter range is up to 800m, and there is immediate link-up when turning the transmitter back on.

The OMNI Tx-3.1 is UK-made and supported. The 2.4 GHz radio frequency is completely legal in the UK for licence-free operation, and is designed to operate reliably in today's busy radio environment, without interference from other devices.

Return to the Products page, or order this product by using one of the methods on the Contact Us page to contact us.